Fluke OF-500-01 OptiFiber, Техническое справочное руководство, Страница: 85 / 278

Using the OTDR
Setting Up for OTDR Testing
3-9
3
Settings for OTDR Tests
Table 3-1 describes the settings that apply to OTDR tests.
Table 3-1. Settings for OTDR Tests
-continued-
SETUP Tab Setting Description
Job tab Job settings Before you run a test you will save, you may want to set the job, fiber ID, and
cabling end information. These settings are saved with test results to identify
the job site, the cabling tested, and the test direction. See Chapter 2 foGr
details.
Cable tab FIBER TYPE Select a fiber type that is appropriate for the type you will test. You can select
factory-installed fiber types or custom types, which you configure with the Edit
Custom Test Limit function in FUNCTIONS. See Chapter 10 for information on
creating custom fiber types.
Note
Select a fiber type before selecting a test limit. The fiber type determines
which test limits are available.