manualshive.com logo in svg

Fluke OF-500-01 OptiFiber, Техническое справочное руководство, Страница: 154 / 278

Поделиться
Скачать
Fluke OF-500-01 OptiFiber Скачать руководство пользователя страница 154

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook

7-2

Changing the Connector Adapter

You can change the module's input connector adapter 
(Figure 7-1) to connect to SC, ST, LC, and FC fiber 
connectors. Additional adapter styles may be available. 
Check the Fluke Networks web site for updates.

W

Caution

•

Cover all connectors with protective caps when 
not in use.

•

Store the extra connector adapters in the canisters 
provided.

•

Do not touch the photodiode lens (see Figure 

 

7-2).

•

Do not overtighten the adapter or use tools to 
tighten the adapter.

amd37f.eps

Figure 7-1. SC, ST, LC, and FC Connector Adapters

To install a connector adapter, refer to Figure 7-2 and do 
the following:

1

Locate the slot in the module connector and the key on 
the adapter ring.

2

Holding the adapter so it does not turn in the nut, 
align the adapter's key with the module connector's 
slot and slide the adapter onto the connector.

3

Screw the nut onto the module connector.

Содержание OF-500-01 OptiFiber























































































































































































































































































Отзывы:

Нет отзывов