MicroScanner
2
Cable Verifier
Users Manual
18
Ethernet Port Detected
The tester can detect active and inactive Ethernet ports, as
shown in Figure 13.
Ethernet port icon.
Port speed for an active 1000 megabit port. The speeds
are 10, 100, or 1000 megabits per second. The example
shows 1000 megabits per second. If the port supports
multiple speeds the number cycles through the speeds.
Cable length. Dashes are shown if the tester cannot
measure the length. This can occur if the port does not
produce reflections.
Length may fluctuate or be obviously too high if the
port’s impedance fluctuates or varies from the cable’s
impedance. When in doubt, disconnect the cable from
the port to get an accurate length measurement.
Содержание MicroScanner 2
Страница 6: ...MicroScanner2 Cable Verifier Users Manual iv Crossed Pairs 47 Short 48 Index 49...
Страница 14: ...MicroScanner2 Cable Verifier Users Manual 6 MicroScanner2 Features egk01 eps Figure 2 MicroScanner2 Features...
Страница 29: ...Testing Twisted Pair Cabling 21 egk14 eps Figure 14 Results Screens for Individual Wire Pairs...