Fluke MicroScanner 2, Руководство пользователя, Страница: 12 / 60

MicroScanner
2
Cable Verifier
Users Manual
4
voltage polarities (
 
) when it detects high
voltage. Disconnect the tester if

and
 
appear. Figures 1 and 11 show examples of this
display.

Do not use the Product around explosive gas,
vapor, or in damp or wet environments.

Use this Product indoors only.

Do not connect the Product to voltages that are
higher than the maximum voltage rating for the
Product.

For Products that have multiple connectors for
different types of tests on copper cabling,
disconnect unused test leads from the
connectors before you do a test.

Use the Product only as specified, or the
protection supplied by the Product can be
compromised.

Do not use and disable the Product if it is
damaged.

Do not use the Product if it operates incorrectly.

Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to chemicals
occurs, clean with water and get medical aid.

Remove the batteries if the Product is not used
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are
not removed, battery leakage can damage the
Product.

The battery door must be closed and locked
before you operate the Product.

Repair the Product before use if the battery
leaks.

Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements. (see "Battery Life, Status, and
Replacement" on page 40)

Turn off the Product and disconnect all test
leads, patch cords, and cables before you replace
the battery.

Be sure that the battery polarity is correct to
prevent battery leakage.