Fluke MicroScanner 2, Руководство пользователя, Страница: 18 / 60

MicroScanner
2
Cable Verifier
Users Manual
10
Using the Wiremap Adapter and Remote
ID Locators
Terminating twisted pair cabling with the standard
wiremap adapter or optional remote ID locators lets the
tester detect all types of wiremap faults. Without this
termination, the tester cannot detect crossed wires or
crossed pairs. For a wire pair with one wire open,
termination is required to detect which wire is open.
Without termination, the tester shows both wires as open.
Using multiple remote ID locators helps you identify
connections at patch panels. The tester shows the number
of the locator connected to the far end of the cabling, as
shown on page 23.
To connect a remote ID locator to a modular (RJ) jack in a
confined area or to a 4-pin modular jack (RJ11), use the
optional universal adapter and a patch cord, as shown in
Figure 4.
egk15.eps
Figure 4. Connecting a Remote ID Locator in a Confined
Area or to an RJ11 Jack
Universal adapter
(8-pin and 4-pin)
Remote ID
locator
8-pin or 4-pin
modular patch
cord