Fluke 990DSL, Руководство пользователя

Страница: 67 / 242

POTS Testing and Fault Location
POTS Auto-Test
4
4-3
3. If desired, supply a value for each generic setup parameter.
Note
Table 3-1 describes the generic setup parameters. If you need
instructions for changing their values, see “Editing the Setup for a
Test” in Chapter 3.
4. Select the tests that you want to include in the Auto-Test. For each test, do
the following:
a) Press
F
or
H
to select the test. Then, press
A
(
Edit
).
b) Press
F
or
H
to select
Y
if you want to include the test or
N
if you
do not want to include the test.
c) Press
L
to save your selection.
Note
To restore the factory default values of the setup parameters, press
D
(
Restore Defaults
).
To change the setup for any of the individual tests, see “Editing the
Setup for a Test” in Chapter 3. Individual test default settings are for
POTS service qualification.
There is a second screen of setups for the POTS Auto-Test, accessible by
pressing
C
(
More
). Table 4-1 lists the tests you can include in the POTS Auto-
Test, plus other setup parameters on the second setups screen.