Fluke 990DSL, Руководство пользователя, Страница: 214 / 242

990DSL
Users Manual
7-12
Uploading Test Results to a PC
To upload saved test results (both text-based and graphical ASCII files) to a
PC, do the following:
1. Connect the CopperPro to a PC (see “Connecting to a PC” in Chapter 2)
using the supplied serial cable.
2. Set up a standard PC communications program (HyperTerminal,
TeraTerm, etc.) as follows:
•
Baud rate =
38,400
bps,
8
Data bits,
1
Stop bit,
No
Parity,
No
Flow
Control.
3. On the tester’s LCD, display one of the following:
•
Text-based results (as shown in Figure 7-3)
•
The list of TDR waveforms with the desired trace selected (as shown
in Figure 7-4)
•
The list of frequency sweep graphs with the desired graph selected (as
shown in Figure 7-5).
4. Start the PC communications program.
5. Uploading:
•
Text Based Results- Press
D
(
Upload
), then either
A
(
Column
Format
) to use the normal column viewing format; or
B
(
Spreadsheet Format
) to use a “tab-delimited” format for direct
importing into a spreadsheet program. The ASCII data will begin
uploading.
•
TDR Waveform or Graph- Press
D
(
Upload
) and the ASCII data
will immediately begin uploading to the PC in tab-delimited format
for spreadsheet compatibility.
Note
To transfer a graphic screen image to a PC, rather than the data file
described above, see “Transferring a Screen Image to PC” in
Chapter 3.