Fluke 6200-2, Руководство пользователя

Страница: 22 / 34

6200-2
Users Manual
14
2. Push

to start the test:
Single test push momentarily
Continuous test hold down >2 seconds
The display shows the test progress.
Continuous test only:
3. Push

to stop the test.
4. Push

to store the test result, if required.
5. For Class II, continue the test for all exposed metal parts on the appliance.
Touch Current Test (I
TOUCH
)

Warning
To prevent possible electrical shock, fire, or personal injury, NEVER
carry out this test unless you have first carried out a thorough visual
inspection, followed by a test of the earthing (Class I appliances), and
then a test of the insulation. You must verify that these tests are passed
before you do this test.

Caution
Live test! The appliance is energized at mains voltage. For this purpose,
switch on the appliance. Appliances driven by motors or equipped with
heating units may present a danger for the person testing (comply with
the appliance instruction manual). Please ensure that the appliance is in
a safe condition to operate and secure before the test.
The Touch Current test consists of:
•
A fuse and L-N loop pre-test.
•
A leakage current measurement with approximately 2 k Ω resistance connected between
earth and exposed conductive parts on the appliance via the test probe. The measurement
is performed by the direct measurement method.
To perform the Touch Current test:
1. Connect the appliance and the test probe as indicated on the Tester, see Figure 4.
•
For Class II appliances apply the probe to any exposed metalwork on the
appliance.
•
For Class I appliances apply the probe to any exposed metalwork on the
appliance that is not connected to earth.