Power Quality Logger
Power Supply
11
Power Supply
The Logger has options for power source:
•
mains
•
measurement line
•
battery
The Start/Stop LED shows the status. See Table 5 for more
information.
Mains Power Source
1.
Attach the mains adapter MA-C8 to both power supply inputs of
the Logger. See Figure 5.
2.
Connect the power cord into the adapter.
3.
Plug the power cord to a wall outlet.
The Logger automatically turns on and is ready to use in
<30 seconds.
4.
Push and hold >3 seconds to turn off the Logger. Push the
Start/Stop button to turn on again.
The Logger needs to be in the Idle state to turn off. A
non-flashing Start/Stop LED indicates the Idle state.
Figure 5. Power Supply
