190M Series III
Users Manual
50
Editing Names
To name the Setup according to your own preferences, continue from step 4 in
Screens with Associated Setups
5. Press
1
to open the EDIT NAME menu.
6. Press
2
to skip to a new character position.
7. Use the cursor and
E
to select another character and press ENTER to accept your
choice. Continue to edit characters until you are done.
8. Press
1
to accept the name and return to the SAVE AS menu.
9. Use the cursor and
E
to highlight
OK SAVE
to save the actual screen with the edited
name.
To modify the default name generated by the test tool, continue from SAVE AS menu in step 8:
9. Use the cursor and
E
to highlight
SET DEFAULT
and save the new default name.
10. Use the cursor and
E
to highlight
OK SAVE
and save the actual screen using the new
default name.
The Setup memory locations store more than what is visible on the screen. In TrendPlot
or Scope Record mode, the full recording is saved. In Scope mode you can save all 100 replay
screens in a single Setup memory location.
To save a TrendPlot select STOP first.
Save Screens in .bmp Format (Print Screen)
To save a screen in bitmap (.bmp) format:
1. Press
S
to show the SAVE key labels.
2. Press
3
to save the screen to:
•
Internal memory (INT) if no USB device is connected.
•
USB device if connected.
The file is saved using a fixed name (IMAGE) and a serial number, for example IMAGE004.bmp.
If no free memory locations are available a message pops up that proposes to you to overwrite
the oldest data set:
•
If you do not want to overwrite the oldest data set, press
3
, then delete one or more
memory locations, and save again.
•
If you want to overwrite the oldest data set, press
4
.
Содержание 190M III Series
Страница 8: ...iv 190M Series III Users Manual...
Страница 84: ...190M Series III Users Manual 76...
