FW-N410-P-M_v0203_01_EN
Page 3
DISCLAIMER
•
The information contained in this document is subject to change without notice. The
manufacturer makes no representations or warranties with respect to the contents
hereof and specifically disclaim any implied warranties of merchantability or fitness
for a particular purpose.
•
If a company or individual makes changes to the N410-P to the extent that the
metrological characteristics are changed, that specific device is no longer traceable
to the NTEP Certificate of Conformance.
SAFETY INSTRUCTIONS
•
Electro static discharge does inflict irreparable damage to electronics! Before
installing or opening the unit, the installer must discharge himself by touching a
well-grounded object.
•
This unit must be installed in a (control) cabinet.
•
This unit must be installed in accordance with the EMC guidelines (Electro Magnetic
Compatibility).
•
Grounding: a proper grounding to the aluminum casing must be connected as
directed.
FEDERAL COMMUNICATIONS COMMITTEE (FCC)
This device complies with FCC 47 CFR 15. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
DISPOSAL - WEEE DIRECTIVE
•
The WEEE Directive requires the recycling of disposed electrical and electronic
equipment in the European Union.
•
Whilst the WEEE Directive may not apply to your region, we support its policy and
ask you to be aware on how to dispose of this product.
•
The crossed out wheelie bin symbol illustrated and found on our products signifies
that this product should not be disposed of in general waste or landfill.
•
Please contact your local dealer, national distributor or the manufacturer’s Technical
Services for information on product disposal.
SAFETY RULES AND PRECAUTIONARY MEASURES
▪
The manufacturer accepts no responsibility whatsoever if the following safety rules, precautions,
instructions and the procedures as described in this manual are not followed.
▪
Modifications of the N410-P implemented without preceding written consent from the
manufacturer, will result in the immediate termination of product liability and warranty period.
▪
Installation, use, maintenance and servicing of this equipment must be carried out by authorized
technicians.
▪
Check the mains voltage and information on the manufacturer's plate before installing the unit.
▪
Check all connections, settings and technical specifications of the various peripheral devices
with the N410-P supplied.
▪
Open the casing only if all leads are free of potential.
▪
Never touch the electronic components (ESD sensitivity).
▪
Never expose the system to heavier conditions than allowed according to the casing
classification (see manufacture's plate).
▪
If the operator detects errors or dangers, or disagrees with the safety precautions taken, then
inform the owner or principal responsible.
▪
The local labor and safety laws and regulations must be adhered to.
