Fluidwell N-410-P, Руководство пользователя

Страница: 25 / 40

FW-N410-P-M_v0203_01_EN
Page 25
4.2.2. OVERVIEW FUNCTIONS SETUP LEVEL
1. PRESET
1.1 UNIT L – m3 – USGAL – IGAL – ft3 – bbl – kg – ton – US ton – lb
1.2 DECIMALS 0000000, 11111.1, 22222.22, 3333.333
1.3 MINIMUM [quantity] xxxxxxx
1.4 MAXIMUM [quantity] xxxxxxx
1.5 PRESET [quantity] xxxxxxx
2. OVERRUN
2.1 OVERRUN disable – enable
2.2 TIME 0.1 – 999.9 seconds
3. FLOWRATE
3.1 UNIT L – m3 – USGAL – IGAL – ft3 – bbl – kg – ton – US ton – lb
3.2 TIME /sec – /min – /hour – /day
3.3 DECIMALS 0000000, 11111.1, 22222.22, 3333.333
3.4 CALCULATION per 1 – 255 pulses
3.5 CUT-OFF 0.1 – 999.9 seconds
4. ALARM
4.1 NO-FLOW disable – enable
4.2 FLOWRATE TIME 0.0 – 999.9 seconds
5. DISPLAY
5.1 Display (direction) increase – decrease
5.2 TANK enable – disable
5.3 (BACK)LIGHT Off – 20% - 40% - 60% - 80% - 100% (brightness)
5.4 DIMMER Off – 20% - 40% - 60% - 80% - 100%
6. FLOWMETER
6.1 SIGNAL Coil-lo, active, npn, npn lp, reed, reed lp, pnp, pnp lp, Namur, Coil hi
6.2 UNIT L – m3 – USGAL – IGAL – ft3 – bbl – kg – ton – US ton – lb
6.3 K-FACTOR 0.000010 – 9999999
7. CONTROL
7.1 BATCH RELAY 2 Off, batch, preclose, alarm, pulse
7.2 BATCH TRANS 1 Off, batch, preclose, alarm, pulse
7.3 PRECLOSE [quantity] xxxxxxx
7.4 WIDTH [sec] 0.001 - 9.999
7.5 AMOUNT [quantity] xxxxxxx
7.6 PULSE Acc. Total – batch
8. Communication
8.1 SPEED 1200; 2400; 4800; 9600; 9600hp; 19200; 38400
8.2 ADDRESS 1-247
8.3 MODE ASCII; RTU; OFF
8.4 DATABITS 7 Bits; 8 Bits
8.5 PARITY none; even; odd
9. OTHERS
9.1 MODEL N410-P
9.2 SW-VER (software version) 03.06.XX
9.3 SERIAL NO. XXXXXXX
9.4 PASSWORD 0000 - 9999
9.5 KEY(BOARD) LOCK start – hold – preset – control – all – off
9.6 TAG-NR xxxxxxx