HF131PEN_v0501_05
Page 49
VAR DESCRIPTION
BYTES VALUE
REMARKS
OTHERS
168
(A8h)
pass code
2
xxxx
read only!
170
AAh
tagnumber
3
0..9999999
Other vars: see standard table
BATCH MODE
223
DFh
batch mode
1
1 = Batch running
2 = Batch pausing
4 = Batch finished
8 = Batch in
overruntime
read only
PRESET
200
(C8h)
preset quantity
3
0-9,999,999
decimals: see 33 (21h)
OTHER F131-P VARIABLES FOR COMMUNICATION
ACTUAL - variable number 208 (DOh) – 6 bytes
READ ACTUAL:
The value of actual read using communication might differ from the value
that appears on the display. This is due to the fact that the display can only display
up to seven digits (e.g. when two decimals are selected for "preset" and actual has
a value of 123456,78 the display will show 23456,78 while communication will read
an “actual” of 12345678 and a “actual decimals” of 2).
TOTAL
- variable number 566 (236h) – 6 bytes
Read total:
The value of total read using RS communications might differ from the value that
appears on the display. This is due to the fact that the display can only display up to
seven digits ( for example when two decimals are selected for total and total has a
value of 123456,78 the display will show 23456,78 while communication will read a
“total” of 12345678 and a “total decimals” of 2).
Write total:
total can only be cleared. This means writing a value different from 0 will result in
the reply of an error message. Only writing 6 bytes of zero’s to total will be
accepted.
