HF131PEN_v0501_05
Page 21
9 - COMMUNICATION (OPTIONAL)
The functions described below deal with hardware that is not part of the standard delivery.
Programming of these functions does not have any effect if this hardware has not been installed.
Consult Appendix C and the Modbus communication protocol description for a detailed explanation.
BAUDRATE
91
For external control, the following communication speeds can be selected:
1200 - 2400 - 4800 - 9600 baud
BUS ADDRESS
92
For communication purposes, a unique identity can be attributed to every
F131-P. This address can vary from 1-255.
MODE
93
The communication protocol is Modbus ASCII or RTU mode. Select OFF,
to disable this communication function.
A - OTHERS
TYPE OF MODEL
A1
For support and maintenance it is important to have information about the
characteristics of the F131-P.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
VERSION SOFTWARE
A2
For support and maintenance it is important to have information about the
characteristics of the F131-P.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
SERIAL NUMBER
A3
For support and maintenance it is important to have information about the
characteristics of the F131-P.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
PASS CODE
A4
All SETUP-values can be pass code protected.
This protection is disabled with value 0000 (zero).
Up to and including 4 digits can be programmed, for example 1234.
TAGNUMBER
A5
For identification of the unit and communication purposes, a unique tag
number of maximum 7 digits can be entered.
