Fluidwell F113-A, Руководство пользователя

Страница: 9 / 52

FW_F113A_v1901_02_EN.docx
Page 9
The SELECT/▲ key and the CLEAR/► key are used for navigation.
The explanation assumes that you are in the submenu TOTAL. When you are:
•
in the first setting and you navigate to the previous setting, the F113-A goes back to the related
main menu.
•
in the last setting and you navigate to the next setting, the F113-A goes to the related main
menu.
Action Result Remark
1
Press the SELECT/▲
key to select the first
setting.
•
The setting UNIT shows.
-
2
Press the SELECT/▲
key again to go to the
next setting. •
The setting DECIMALS
shows.
-
3
Press the CLEAR/► key
to select the previous
setting. •
The setting UNIT shows.
-
4
Press the CLEAR/►key
again to go to the
previous setting. •
The submenu TOTAL
shows
This is normal behavior
because the setting UNIT is
the first setting of the
submenu TOTAL.
How to make a setting
Changes are only saved when you press the PROG/ENTER key.
The explanation assumes that you are in the submenu TOTAL and the setting UNIT. When you do
not want to save the change, wait for approximately 20 seconds or press and hold the
PROG/ENTER key for approximately 3 seconds.
Action Result Remark
1 Momentarily, press the
PROG/ENTER key.
•
The PROG indicator blinks.
•
The engineering unit L shows.
To access the setting.
2
Press the SELECT/▲ key
to select the next
engineering unit.
•
The PROG indicator blinks.
•
The engineering unit m
3
shows.
If you wait too long, the
program mode goes off and
changes are not saved, this
is normal behavior.
3
Press the SELECT/▲ key
to select the next
engineering unit.
•
The PROG indicator blinks.
•
The engineering unit US GAL
shows.
-
4
Press the CLEAR/► key
to select the previous
engineering unit •
The PROG indicator blinks.
•
The engineering unit m 3 shows.
-
5 To confirm the changes:
Momentarily, press the
PROG/ENTER key.
•
The PROG indicator goes off.
•
The change is saved.
•
The engineering unit m
3
shows.
If you do not press the
PROG/ENTER key to
confirm, your selection is not
saved.
To discard the changes:
Press and hold the
PROG/ENTER key for
approximately 3 seconds.
•
The PROG indicator goes off.
•
The change is discarded.
•
The engineering unit L shows.
-