16
b.
Press twice for two minute pump operation
c.
Press three times for three minute pump operation
d.
Press four times to turn pump off
4.
After pump turns off turn the filter multiport valve to Rinse
5.
Press the Safety backwash button on the use panel once for a one minute rinse
6.
When
pump turns off, move the multiport valve back to filter position
7.
Press
the pool mode button to “Auto” function so that the chlorinator will operate on time clock settings.
3.3 RUN DRY SAFETY FEATURE
Your VX7T Salt Chlorine Generator incorporates a run dry safety cut out. When the Chlorinator turns the filter pump on, it will
check for water flow. If no water flow is detected within 3 minutes, the chlorinator will turn the pump off. This is designed to
protect the pump seal and parts from overheating if no water flow is present.
On initial start-up, you will need to prime the pump. In some cases, the pump will take more than three minutes to prime and
for water flow to be detected by the chlorinator. If this should occur, simply start the pump again by pressing the Pool Mode
button to “on”.
If during normal operation, the chlorinator switches the pump off after three minutes, then check the position of all valves,
empty skimmer basket and pump basket and clean the filter.
PLEASE SEE PAGE 20 FOR THE RECOMMENDED METHOD OF CELL CLEANING AND
MAINTENANCE.
When
replacing the cell, only use replacement cells having a label t h a t clearly
states that it is a replacement cell for the VX7T Salt Chlorine Generator, matching
specific chlorinator model. REGISTRATION NUMBER 31187,
PEST CONTROL
PRODUCTS A C T
3.4 GENERAL OPERATION/POOL CHEMISTRY (ALSO SEE CHART ON PAGE 21)
Your VX7T Salt Chlorine Generator must be run every day to ensure that your pool is correctly sanitized. As the sun dissipates
chlorine, running times are higher in the summer compared to the winter. Astral recommends that you initially run your
chlorinator at maximum output.
