/ 2 /
Before you start using this product, please follow these basic
guidelines:
Carefully read the manual before beginning with the
installation process.
Remove your graphics card from the computer for the
safest mounting process to prevent any possible damage
to your GPU or its circuit board (PCB).
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with
the rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid! For best
results, EK recommends the use of EK-CryoFuel Coolants.
Make sure to bleed air out of your water block thoroughly
in order to reach optimal performance
This product is made from aluminum and can be only used
with other aluminum liquid cooling components, such as Al
fittings, water blocks and radiators. Mixing aluminum with
copper and brass products can cause galvanic corrosion
of the metal and render liquid cooling equipment useless.
Such misuse is not covered by warranty.
