/ 7 /
PREPARING YOUR GRAPHICS CARD
STEP 1
REMOVING THE STOCK COOLER
Place your graphics card on the flat surface and carefully remove the stock
cooler. Do not forget to unplug all the LED and fan connectors. Pay attention
to the following steps in order to install EK-AC Twin Edge RTX 3070 water
block onto the graphics card.
STEP 2
CLEANING THE PCB
Wipe off the remains of the original thermal compound using a nonabrasive
cloth or Q-tip, as shown in the sample image, until the components and circuit
board are completely clean. EK recommends the use of denatured alcohol for
removing TIM leftovers.
STEP 2
