FLTR OBF, Руководство пользователя

Страница: 12 / 24

POSSIBLE CAUSE
Screen may be partially plugged.
SOLUTION
Perform super flush as described above.
POSSIBLE CAUSE
Rotor may be jammed which results in only cleaning the screen area that
is directly in front of the nozzles.
SOLUTION
Open tank and check for free movement of rotor mechanism.
POSSIBLE CAUSE
Pre-strainer is contaminated.
SOLUTION
While running, check pressure between filter inlet and filter outlet, use port
provided on waste nipple. The difference between these two readings is the
pressure drop through the pre-strainer. It should be zero.
5.7 Problem: When changing irrigation blocks, filter flushes rapidly.
POSSIBLE CAUSE
Water flow in new block is causing an increased pressure drop through filter
which exceeds the controller setting.
SOLUTION
Re-adjust controller for the highest flow rate. (See pages 2 and 3).
For more information:
WEB: FLTR.com.au PHONE: (+61) 1300 62 4020 EMAIL: info@FLTR.com.au SKYPE: Purple.Engineering