FLTR OBF, Руководство пользователя

Страница: 13 / 24

5.8 Problem: Screen will not clean properly.
POSSIBLE CAUSE
The flush cycle might be set too short (5 seconds is normal). Flushing valve
does not open fully.
SOLUTION
Restriction in flushing valve dump line due to long "run" distance, running
uphill, 2" line more than 20' long, 2" line has more than one elbow.
POSSIBLE CAUSE
Filter was shut down "dirty" with contaminant drying on the screen.
SOLUTION
Perform super flush as described on Section 5.5, page 9. If unsuccessful,
remove filter, see Page 5 and soak in swimming pool acid solution (I qt.
muriatic acid to 5 gal. water) for 15 minutes. Then spray the filter with a high
pressure hose to remove the contaminant. After reinstalling the filter, perform
another super flush.
For more information:
WEB: FLTR.com.au PHONE: (+61) 1300 62 4020 EMAIL: info@FLTR.com.au SKYPE: Purple.Engineering