FLORABEST GB-2784, Инструкция по эксплуатации

Страница: 9 / 30

11
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Scope of delivery
1 x Seat (1)
1 x Left side section (2)
1 x Right side section (3)
2 x Crossbars (4)
2 x Screws (88mm) (5)
10 x Screws (68mm) (6)
2 x Screws (63mm) (7)
4 x Washers (8)
4 x Nuts (9)
16 x Screw head caps (10)
4 x Screw and nut caps M6 (11)
2 x Screw and nut caps M8 (12)
2 x Distance spacers 2.5mm (13)
2 x Distance spacers 9mm (14)
2 x Distance spacers 13mm (15)
1 x Allen key (16)
1 x Screwdriver key (17)
1 x Instructions for use
Technical data
Dimensions: approx. 119 x 96 x 66cm
(W x H x D)
Maximum load: 200kg
Correct use
The article is not designed for commercial use.
The article is designed for use in the living area,
e.g. balcony, terrace, or garden.
Safety notes
Danger to life!
• Never allow children to play with the packa-
ging material unsupervised. There is a risk of
suffocation.
Risk of injury!
• Ensure that correct stability has been achie-
ved before using the article.
• Place the article on a level surface.
• Take particular care of your fingers when
folding and unfolding the article. There is a
risk of injury from trapped fingers.
• Ensure that the folding function is correctly
locked before using the article.
• Ensure that the article has been completely
clamped in place before using the article.
• The article may only be used under adult
supervision and may not be used as a toy.
• Inspect the article for damage or wear before
each use.
• The backrest must not be used as a seat.
• Never stand on the article.
• Do not use the article in the vicinity of an
open fire.
Avoid damage to property!
• Secure the article during extreme weather
conditions, e.g. in strong winds.
Store the article in a sheltered room.
Assembly instructions
Caution! Assembly must be carried out
by two competent persons!
Step 1 (figure B)
1. Attach the two crossbars (4) to the right side
section (2) using the screws (6).
Note: Attach the crossbars in such a way that
the rivet heads face forwards.
2. Screw the left side section (3) to the two
crossbars (4) with the two screws (6).
3. Place the screw head caps (10) on the screws
(6).
GB/IE