66
GB
Allow the machine to cool
down before all maintenance
and cleaning works. Danger
of burn injuries!
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• When cleaning, also remove the chain
wheel cover (15) so that this area can
be cleaned as well.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Maintenance Interval Table
Machine part
Action
Before
every
use
After 10 hours
of operation
Components of the chain
brake
Check, replace if required
Sprocket chain wheel
Check, replace if required
Saw chain (5)
Check oil, regrind or re-
place if required
Guide bar (4)
Check, turn round, clean
and oil
6. After carrying out of the back cut,
the tree falls by itself or with the
aid of the felling wedge or crow-
bar.
As soon as the tree begins to
fall, pull out the saw from the
section, stop the motor, place
the electric chainsaw down
and leave the workplace us-
ing the withdrawal path.
Maintenance and
cleaning
Basically, carry out mainte-
nance and cleaning works
with switched-off motor and
power plug removed. Danger
of injury!
Leave any maintenance and
servicing work not covered
by this manual to our Serv-
ice-Center. Use only original
spare parts.
