MAINTENANCE
/
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY
/
SPECIFICA
TIONS
GETTING
ST
ARTED
14
13
OPERATION (continued)
NORMAL OPERATION MODE (CONTINUED)
Screen 1 – Input Frequency
After button is released, the software will display the input frequency in Hz.
The top row is used to indicate frequency.
The information row will display messages.
(See Figure 11-2)
Figure 11-2
Screen 2 – Output Frequency
Advancing to next screen will display the output frequency in Hz.
The top row is used to indicate frequency.
The information row will display messages.
(See Figure 11-3)
Figure 11-3
Screen 3 – Battery Status
Advancing to the next screen will display the battery status.
The top row is used to indicate battery life
with each dash indicating a percentage of
battery life remaining. The information row
will display messages. (See Figure 11-4)
Figure 11-4
NOTE:
If the battery life is sufficiently low,
“LOWBAT” will be displayed in the
information row. This low battery message
will be displayed automatically without
running a diagnostic battery check.
Figure 11-5
Screen 4 – Flow Status
Advancing to the next screen will display the battery status.
The top row is used to indicate flow rate in
the volume units programmed into the
computer. The information row will display
messages, i.e.:
No Flo
,
Lo Flo
,
Hi Flo
.
Figure 11-6
OPERA
TION