Technical Guide
CN-IC1-12
Title
:
i-Controller Visograph Navigation REV.201.05
EXTERNAL
26
1-5JULY2021
Water-Cooled Condenser
A unit equipped with Water-Cooled Condenser, will have
a Water Balance test on the System Test screen to set the
minimum and maximum flow rate on the water valves.
Figure 61. Water Balance Mode screen 1
Figure 62. Water Balance Mode screen 2
Chilled Water Unit
Chilled Water units will have a Chilled Water test in place
of Compressors. From this screen, the user will be able to
perform various override functions
Figure 63. Chilled Water Overrides screen
Air Balancing
Air Balancing Mode aids the air balancer in the balancing
process. Refer to AF-IC1-01 i-Controller Air Balancing
Mode for additional instructions.
Figure 64. Air Balance Mode screen
T1: Go to System Test Menu
T4: Scroll Up/Increase Value
T5: Enter (Select and Set Value)
T6: Scroll Down/Decrease Value
Compressor Test Mode
Compressor Test Mode is used to ensure operation of
each compressor. The compressor test mode will turn
each compressor ON to full capacity.
Figure 65. Compressor Test Mode screen
