Technical Guide
CN-IC1-12
Title
:
i-Controller Visograph Navigation REV.201.05
EXTERNAL
20
1-5JULY2021
Network Information
The Network Information screens to display the Firmware
Version, Expansion Board status (Online/ Offline),
Building controller status (Online/ Offline), i-Controller
Address (Modbus or BACnet), Baud Rate, IP Address, and
Parameter File version.
The Network Information screen displays the
Flō
i-
Controller IP address, and status of the connection to the
Building Management System (BMS). If the
Flō
i-
Controller is connected to the BMS the status will show
“Online”,
otherwise, it
will show “Offline” if the BMS is
offline or the i-Controller is not connected.
For units on a Modbus network, this screen displays the
Modbus address (configurable), and the Modbus baud
rate. To change the Modbus address:
1.
Using the
and
buttons (T4 and T6
respectively) navigate to the value that you wish
to change.
2.
Once the value is highlighted, press the
(T5)
button and the value should blink.
3.
Using the
and
buttons increase and
decrease the value as desired.
4.
Once the desired value has been reached press
the
button to set the value.
5.
Once all changes have been completed, press the
(T1) button to return to the Main Menu.
Modbus Network
The Modbus and BACnet Network information screens
display the communication status, address and
parameter version.
Figure 45. Modbus Network Information screen 1
T1: Go to Main Menu
T4: Scroll Up/Increase Value
T5: Enter (Select and Set Value)
T6: Scroll Down/Decrease Value
T8: Network Options
BACnet Network
Figure 46. BACnet Network Information screen 1
