- 6 -
Glue the hinges with CA- or PVA glue into the rudder and
rudder flaps.
Look for easy movement!!
Feel out the frame for rudder servo and open the frame,
using a sharp hobby knife. Fix the servo like shown in the
picture with servo lever pointing down.
Find the correct highness of rudder lever and mark position.
Remove covering film under the rudder lever basement
carefully. Glue the rudder lever with epoxy glue to the
rudder. If epoxy is hardened, mount the rudder linkage and
lock screws with blue locking agent.
Feel out the servo frame for elevator servo and open with
hobby knife carefully. Mount the servo with screws, the
servo lever is pointing up.
Find the correct position of the rudder lever and mark it
with a fine and non permanent marker.
