- 7 -
Remove the covering film along the mark. Then glue the
lever to the elevator flap, using epoxy glue. If glue is dry,
finish the linkage and lock the screws with blue locking
agent.
The tail plane is ready now.
Look for all parts which belong to the landing gear!
Assemble the landing gear as shown in the picture.
Mount the wheel pant in a position, parallel to the fuselage.
Fix the pant with the attached screw.
Additional to the screw, you can fix the wheel pants with
silicone glue towards the aluminium legs.
At least insert the left and right landing gear into the slot of
the fuselage and fix with M3 screws.
Dont forget locking agent.
