- 9 -
The propeller, not included in the kit should be balanced
as good as possible.
Assemble prop and spinner. The best result for balancing
you can get, if you have the possibility to balance the
propeller together with the spinner.
Mount the propeller unit to the motor shaft with the 2 M3
setscrews. Lock with blue locking agent.
You can make a little flat spot onto the motor shaft at the
position of one setscrew. So you can get more stability.
During mounting the spinner cap do not tighten the screws
to strong, because the thread could be damaged.
Use the attached velcro tape, to fix the battery inside the
body. Fasten the battery, using Fliteworks battery tape
(order no.: 008-501).
To fix the receiver, you can use double sided adhesive
tape. Please consider the references of your Rx-manual
This assembly of RC components shows only a possible
sample.
