- 3 -
Dear Customer!
Congratulations for purchasing the Flitework Midi Edge 540. We say thanks for your trust and we wish you a lot of happy
flights with your new Midi Edge 540.
ATTENTION PLEASE!
Remote controlled model planes are not a toy! For assembling, flying and servicing such models, you need a high grade
of technical comprehension and liability.
Careless assembling and operation may cause personal and material damage.
Because the Flitework GmbH has no influence on assembly, RC installation, operation and servicing of the flight device,
any liability is rejected under explicit advice to these dangers.
Recommended accessories:
1 x
Motorset FW 2840 order no.: 0800-001
4 x
Servos order no.: 007-2412
1 x
Lipo-Akku 3s 1300 mAh 20C order no.: 018-1303
1 x
5-6 channel receiver
4 x
Servo cable extensions
Before assembling, please check the completeness and the accuracy of the model kit. Partially built models are
excluded from the right of replacement.
For the purposes of quality improvement we reserve ourselves changes of the technical implementation without any
announcement.
The current instruction manual should be support for the assembling of the model. The shown pictures and hints are
without any commitment. Legal effects cannot be deducted from this manual.
·
Hobby knife
·
Philips screw driver
·
Drill 1.2 and 5 mm
·
Adhesive tape
·
10 min epoxy glue
·
CA glue
·
PVA glue
·
Set of wrenches
