SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page
24
of
70
Antennvägen 6
SE-187 66 Täby
Sweden
1.4.11 4-Way Switch
(continued)
NOTE:
There are three different temperature range settings on the IR Camera.
The ranges are; <10°C, 10 to 30°C and >30°C.
The re-calibration between the different ranges will take several minutes.
The system remembers range settings after power cycle.
Legend
FUNCTION
Description
Screen Symbology
Reference/Notes
FLT
◄
TV CAMERA
IR FILTER
2a.1.) Sony
TV sensor selected;
Momentary push to
FLT
toggles
the TV camera IR cut off filter
between IN and OUT.
In the filter OUT position the TV
camera becomes more sensitive
in low light conditions.
2a.2.) Hitachi
TV sensor
selected;
No function
Text field 4:
FLT
NOTE:
FLT in Text field 4,
indicates that the IR cut off
filter is OUT.
For FLT function of Hitachi TV
camera, See § 1.4.9
FLT
◄
IR CAMERA
DDE
2b)
TI sensor selected;
Momentary push to
FLT
cycles
the IR camera between DDE off
and the different levels.
[ OFF
25%
40%
55%
OFF ]
Higher percentage gives more
detailed enhancement.
Text field 6:
DDE:OFF
DDE:25%
DDE:40%
DDE:55%
▲
and
▼
CHANGE IR
CAMERA
TEMPERATURE
RANGE
(see note below)
3)
TI sensor selected;
Momentary simultaneous push
on
FUNC
button and
▲
will
raise the temperature range.
FUNC
and
▼
will lower the
range.
Text field 6:
<10°C
10 to 30°C
>30°C
During re-calibration:
T°C ADJ
