FLIR ThermaCam P25, Руководство пользователя

Страница: 109 / 192

15 Troubleshooting
Solution Possible reason Problem
Press ON/OFF to switch on
the camera. The camera may have been switched off
automatically due the settings in the
Power
setup dialog box.
The LCD on the remote
control, or the viewfinder,
displays no image at all.
Press ON/OFF to switch on
the camera. The LCD may have been switched off auto-
matically due to the settings in the
Power
setup dialog box.
Verify that the connector on
the remote control cable is
properly inserted. The connector on the remote control cable
may not be properly inserted into the re-
mote control connector camera.
Insert a fully charged bat-
tery. There is no battery in the battery compart-
ment.
Charge the battery. There is a battery in the battery compart-
ment, but the battery is depleted.
Verify that the power supply
connector is properly insert-
ed. If you are using the power supply, the
power supply connector may not be prop-
erly inserted into the power connector on
the camera.
Verify that the mains plug
is properly plugged in. If you are using the power supply, the
mains plug may not be properly plugged
in into a mains supply.
Verify that the mains cable
is properly plugged in. If you are using the power supply, the
mains cable may not be properly plugged
in into the power supply.
Change the level. The level needs to be changed. The LCD/viewfinder dis-
plays an image, but it is of
poor quality.
Change the span. The span needs to be changed
Autoadjust the camera. The camera needs to be autoadjusted.
Change the range. The target may be hotter or colder than the
temperature range you are currently using.
Change the palette. A different palette may be more suitable for
imaging the target than the one you are
currently using.
15
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
95