FLIR TCX series, Инструкция по эксплуатации, Страница: 95 / 150

Using FLIR Cloud™ Client for PC or Mac 10
3. In the Alarm sources menu, you set up the parameters that trigger the alarm.
• Under Alarm Type , select the alarm type that will trigger an alarm. For example,
you can select Motion Detect for the alarm to be triggered by motion.
• Select the systems or channels you would like to trigger an alarm. Continuing the
example, if CAM 1 is selected, the alarm will be triggered if there is motion on
CAM 1.
• Click Next .
4. In the Alarm link menu, you set up the responses to alarms. Select the channels that
will pop up or alarm out devices (not included; not all systems support alarm out devi-
ces) that will be triggered by an alarm.
For each channel selected, configure the following:
• Video : Pop up a window with live video from the selected channel, like the one
below.
• Record : Record video from the selected channel.
NOTE
PC Users : You may need to run the client software as admin to record.
• Preset : If you select a PTZ camera, you can select the preset that will be activated
when an alarm occurs.
• Stay Time : Enter how many seconds the video window will stay open or record
when an alarm occurs.
#LX400062; r.30885/35920; en-US 87