FLIR TCX series, Инструкция по эксплуатации

Страница: 38 / 150

Setup 6
To configure IP address settings:
1. Under Host Name , enter the Host Name for the camera up to 32 characters.
2. Under IP Version , select IPV4 or IPV6 .
3. Under Mode , select Static or DHCP . If you select Static , configure the IP Address ,
Subnet , Mask , Default Gateway , Preferred DNS Server , and Alternate DNS
Server .
4. Click Save to save changes.
6.2.2 Connection
The Connection menu allows you to configure the camera ports and maximum connec-
tions to the camera. You must port forward the HTTP (default:
80 ) and TCP (default:
35000 ) port numbers on your router to enable remote connection to your camera.
NOTE
If you are not using an NVR and are setting up multiple cameras in the same network for remote access,
you must assign unique TCP and HTTP ports for each camera. Two cameras cannot share the same
port number.
To configure connection settings and ports:
1. Under Max Connection , enter the maximum number of devices that can connect to
the camera at the same time between 1 and 20 .
#LX400062; r.30885/35920; en-US 30