Camera Link Module Accessory
102-PS242-100-02
Rev100
October 2011
Page 9 of 16
Video” tab on the top, and selecting “CMOS” for the XP Bus Output. Select either 14-bit or 8-bit,
depending upon your preference. 8-bit data has the AGC applied and looks similar to the analog
video image. 14-bit data does not have AGC applied.
Figure 8: FLIR Camera Controller GUI – Digital Tab
3.
Once you make these changes, it is a good idea to save settings to make them power cycle
persistent. This can be done on the Setup Tab by clicking the “Save Settings” button.
4.
The digital data complies with Base Camera Link standards and will be compatible with most off-
the-shelf Camera Link frame grabbers. FLIR has tested the ImperX FrameLink Express frame
grabber (
http://imperx.com/frame-grabbers/framelink-express
) and the Matrox Solios Camera
Link frame grabber
1
3
2
