manualshive.com logo in svg

FLIR Tau 640, Руководство пользователя

Поделиться
Скачать
FLIR Tau 640 Скачать руководство пользователя страница 34

3—Basic Operation of the Tau 640 and GUI

Tau 640 User’s Manual

3-20

June 2011

TAU-0640-00-10, version 110

Camera Digital Output

Note

Note

Off

: The digital data stream coming from the Tau 640 camera is turned off.

8-bit

: Data from the 640 

×

 480 (NTSC) or 640 

×

 512 (PAL) video pixels is provided 

after application of the current Automatic Gain Control (AGC) and Dynamic Detail 
Enhancement (DDE). The 8-bit data is essentially a digital version of the same data 
provided on the analog video channel.

14-bit Filtered

: Data from 640 

×

 512 pixels is provided prior to video processing 

modes in the 8-bit data described above. The 14-bit data is the 

filtered

 data to include 

the Dynamic Detail Enhancement (DDE) and will appear gray when saving 16-bit TIFF 
files. See “Tau 640 Digital Data Channel” on page 4-1.

14-bit Raw

: Data from 640 

×

 512 pixels is provided prior to all video processing and 

does not include the Dynamic Detail Enhancement (DDE) or bad pixel replacement. 
The 14-bit data is the ‘raw’ data and will also appear gray when saving 16-bit TIFF 
files. See “Tau 640 Digital Data Channel” on page 4-1.

XP Mode Select 

The Tau 640 camera has 18 XP pins on the 50-pin Hirose connector. The XP mode 
uses a number of these pins to output parallel digital image data.

BT656

: The BT.656 parallel output is a common interface which will drive many LCD 

displays. The data is digitally encoded NTSC/PAL video and will have AGC, DDE, 
symbols, and color included.

CMOS

: The CMOS interface is a parallel output that allows the user to access 8-bit 

AGC corrected data or 14-bit data. The signal levels are 0 - 3.3 V CMOS logic and are 
intended to drive boards mounted directly to the Tau 640 camera. CMOS is not 
intended to drive a cable. An XP-board (1.5” by 1.5”) reference design is available 
upon request.

The Revert feature is not available in CMOS or LVDS digital data.

AGC mode will only affect the digital data output if Camera Digital Output mode is set to 8-bit 
data.

Содержание Tau 640


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды