manualshive.com logo in svg

FLIR Tau 640, Руководство пользователя

Поделиться
Скачать
FLIR Tau 640 Скачать руководство пользователя страница 17

Tau 640 User’s Manual

3—Basic Operation of the Tau 640 and GUI

TAU-0640-00-10, version 110

June 2011

3-3

3.1.3 Connecting the Tau 640 Camera for Analog Video

Plug the Video cable into the mating connector on the 
back of the camera. Attach the other end to a 
compatible video monitor’s composite video input. If 
your monitor has an RCA input connector, a BNC to 
RCA adapter can be used.

Plug the mini USB plug into the mating connector on 
the back of the camera. Connect the other end of the 
cable to a USB port on the computer. At this point, 
you are only using the power from the USB port.

3.2 Remote control of the Tau 640 

Camera

The Tau 640

 

camera with a Universal Serial Bus (USB) interface accommodates advanced 

camera control through the FLIR Camera Controller GUI. A user also can control the camera 
through this interface using their own software and hardware by following the Serial 
Communication Protocol and command structure defined in Appendix B. This requires 
programming skills and a strong technical background. The FLIR Camera Controller GUI is 
offered as a free download from FLIR using a Windows based PC with a standard USB port. 
This software provides remote control of various camera features and modes.

The FLIR Camera Controller GUI

 

software is compatible with Windows XP with .Net Framework 

version 2.0 or later. The GUI will prompt the user to update to the latest .Net Framework.

Note

If your embedded or specialty applications require custom control software, a Software 
Developer’s Kit (SDK) is available. Those intending to generate their own custom software are 
encouraged to read the remainder of this section regarding the FLIR Camera Controller GUI to 
better understand the camera modes and parameters.

We recommend that Windows Update is turned on, keeping the operating system current; 
and that you use the latest version of the FLIR Camera Controller GUI
(available on our website). 

USB cable 

Analog video out

Power light

to computer

Содержание Tau 640


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды