910-0001-00-INS -R02
Page 42 of 53
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at [email protected] .
To configure a radar synchronization method and chirp slot, use the following steps:
Note
The synchronization method must be programmed before being able to change the chirp slot.
Step 1
Start the Radar Console application in direct mode
Step 2
Logon as Administrator on the Radar Console. Select the desired radar assembly to configure,
and click on the
button.
Step 3
In the Parameters window, Radar Setup group of parameters, and Current, set Sync_method
and Chirp_slot to the desired values. For the R5D also set the frequency Band to the desired
value. Then press the FLASH button. The radar assembly will reset.
Figure 26 - Configuring Chirp Slots
Содержание Ranger R Series
Страница 53: ......
