2. Configure the following:
•
Function
: Select
Netkeyboard
.
•
Baud Rate
: Select a baud rate that is compatible with your PTZ keyboard.
•
Data Bits
: Select a data bits setting that is compatible with your PTZ keyboard.
•
Stop Bits
: Select a stop bit setting that is compatible with your PTZ keyboard.
•
Parity
: Select a parity setting that is compatible with your PTZ keyboard.
3. Click
OK
to save changes.
16.3.25
Saving Your System Configuration to a USB Thumb Drive
The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. Insert a USB thumb drive (not included) into one of the USB ports.
2. From the Main Menu, click
and then click
Setting>Config Backup
.
3. Under
Device Name
, select the USB device where you would like to save the
configuration.
4. Click
EXPORT
to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB thumb drive (not included) with a saved system configuration into one of
the USB ports.
#LX400057; r. 1.0/24460/24461; en-US
70