FLIR E70353, Инструкции по установке и эксплуатации

Страница: 10 / 104

Warning: Maintain a permanent watch
Always maintain a permanent watch, this will allow you to respond to
situations as they develop. Failure to maintain a permanent watch puts
yourself, your vessel and others at serious risk of harm.
Caution: Do not open the unit
The unit is factory sealed to protect against atmospheric humidity,
suspended particulates and other contaminates. It is important that you
do not open the unit or remove the casing for any reason. Opening
the unit will:
• compromise the seal with possible damage to the unit, and
• void the manufacturer’s warranty.
Caution: Power supply protection
When installing this product ensure the power source is adequately
protected by means of a suitably-rated fuse or automatic circuit breaker.
Warning: Ensure all equipment has isolated power
supply
This product features an isolated power supply. To prevent potential
damage to equipment, it is recommended that any external equipment
connected to this product also features an isolated power supply.
Caution: Service and maintenance
This product contains no user serviceable components. Please refer
all maintenance and repair to authorized
FLIR dealers. Unauthorized
repair may affect your warranty.
Caution: Sun covers
• If your product is supplied with a sun cover, to protect against the
damaging effects of ultraviolet (UV) light, always fit the sun cover
when the product is not in use.
• Sun covers must be removed when travelling at high speed, whether
in water or when the vessel is being towed.
Cleaning the thermal camera
The camera housing and lens will require occasional cleaning. You should clean the
lens when image quality degradation is noticed or excessive contaminant buildup is
seen. Clean the interface between the yoke and base often to prevent accumulation of
debris or salt deposits.
When cleaning this product:
• Do NOT wipe the lens window with a dry cloth, or with abrasive materials such as
paper or scrub brushes, as this could scratch the coating.
• Do NOT use acid or ammonia based products.
• Do NOT pressure wash.
Particular care should be taken when cleaning the lens window, this has a protective
anti-reflective coating which may be damaged by improper cleaning.
1. Switch off the power to the unit.
2. Clean the camera body with a clean, soft cotton cloth. You can moisten the cloth
and use a mild detergent if required.
10