14.2.3
Annotating images
You can save additional information with an infrared image by using annotations. Annota-
tions are added to the image file, and can be viewed and edited in the image archive.
• You can set the camera to display annotation tools when an image is saved. Select
(
Settings
) >
Save options & storage
>
Add annotation after saving
.
• You can also add annotations to a saved image in the image archive.
14.2.4
Programming the camera (time-lapse)
You can program the camera to save images periodically (time-lapse).
1. Select
(
Settings
) >
Recording mode
>
Time-lapse
.
2. Push the navigation pad. This displays a dialog box where you can set the save
conditions:
•
Save interval
: The time interval between each saved image.
•
Total number of images
: Periodic saving will stop when the set number of images
have been saved.
Note
If you select “∞,” the camera will keep on saving images until the memory
card is full or until you manually stop the time-lapse.
3. To start the time-lapse (periodic saving), pull and release the trigger.
4. To manually stop the time-lapse, pull and release the trigger.
5. When the time-lapse is completed, an information screen is displayed. Push any but-
ton or touch the screen to return to the live image.
14.2.5
Recording a video clip
To record and save video clips, do the following:
1. Select
(
Settings
) >
Recording mode
>
Video
.
2. To start a recording, pull and release the trigger. A counter at the top of the screen
displays the duration of the recording.
#T810583; r. AA/75420/75423; en-US
67
