Setup — Screening station (Auto and Button mode)
10.3.3
Prepare the camera
Note
Prepare the camera before you mount it. It can be difficult to do the necessary
settings when the camera is mounted.
10.3.3.1
New camera
If you have a new camera, do the following:
1. Charge the battery for 2 hours using the stand-alone battery charger.
2. Push the battery into the battery compartment. The battery makes a click when it
locks in place.
10.3.3.2
Turn on the camera
• To turn on the camera, push the on/off button
.
• To turn off the camera, push and hold the on/off button
for more than 0.5 second.
10.3.3.3
Configure the camera
For accurate screening results, some important settings are needed in the camera.
You access the camera settings via the menu system.
• To display the menu system, push the navigation pad or tap the menu system button
.
• To navigate the menu system, you can use the navigation pad or tap the camera
screen.
To configure the camera, do the following:
1. Make sure automatic image adjustment mode is active by selecting
(
Temperature
scale
) and then
(
Auto
).
2. Disable continuous autofocus by selecting
(
Settings
) >
Device settings
>
Focus
>
Continuous autofocus
>
Off
.
Note
When the Screening mode is activated, some more important settings are auto-
matically made. For example, since the laser beam can cause eye irritation, the laser is
automatically disabled.
10.3.3.4
Activate and configure Screening mode
1. Activate the screening mode by selecting
(
Settings
) >
Recording mode
>
Screening
.
2. In the
Screening
dialog box, do the following:
• Select the option
Auto
or
Button
.
• Select if there should be a beep or no sound when the system detects an elevated
temperature.
• Select the allowed deviation from the reference average. It is recommended to
start with the default value 1.0
℃
/1.8
℉
.
10.3.4
Prepare the button
For Button mode screening, the Remote operation button is needed to trigger the
screening.
10.3.4.1
Pair with the button
Before you can use the Remote operation button with the camera, you need to pair the
devices.
#T810583; r. AA/75420/75423; en-US
42
