March 10, 2019
70
Accessing the CM-330X via a Web Browser
CM-3304/CM-3308 User and Installation Guide
5.3.1.6.6.1 Initial Settings
If setting up
Basic Video Analytics
for the first time, see
Providing cameras with Basic Video Analytics Licenses
The setup for the Analytics Rules follow the same general setup sequence for all Rules. Each
Rule has specific configurations that are described in detail in each relevant section.
Notes
:
1. It is important that the camera is properly positioned to allow an adequate Field of View.
2. All Rules are directional. A rule's direction is indicated in the Setup screen.
3. Only
one
rule may be active at a time.
General Setup
1. The
first time
a user starts configuring the Analytics pages, the
completed. This configures the
minimum
and
maximum
object sizes to be detected in a scene.
2. The user will then draw desired lines or zones depending on the specific rule.
3. Each rule's "basic" page will vary depending on the required settings.
4. The
section is used to change
Sensitivity
, create exclusive
Masks
and set an
Arming Schedule
.
5. The final step is to choose the
to be trigger when a rule is activated.
Note:
This section appears on every Analytic rules page and is linked between all rule. i.e. setting and
changing this setting for any rule, will update those settings to all rules.
The setup process includes two simple steps:
·
Setting the minimum object size to be detected in the scene
·
Setting the maximum object size to be detected.
It doesn’t matter where the markers are placed in the scene, but it is important that they reflect potential
objects in the scene and their correct proportions.
The first time a user enters a specific Rules screen, they will be asked to define the size that an object or
person on the screen might be.
The first screen is
Min. Object Size
where the user defines the minimum size of an object that they would
like to be detected (yellow box).
The second screen is
Max Object Size
where the user defines the maximum size of an object that they
would like to be detected (blue box).
The section can be changed at anytime by clicking the
Reset Object Size
button from the main screen for
that rule.
