61
March 10, 2019
Accessing the CM-330X via a Web Browser
CM-3304/CM-3308 User and Installation Guide
To set the arming schedule
7.
See instructions in section
.
5.3.1.5.4 Motion
The
Events Source >
Motion
screen is used for defining the motion zone area settings; defining settings,
including the method for storing a snapshot, recording on the edge, email headers, and text for the OSD;
and for setting the arming schedule.
Figure 74: Events Source > Motion Screen
Notes:
1. If the camera is attached to Latitude, motion detection configuration should be done from Latitude
Admin Center, not from the web interface.
2. If Motion Detection is enabled, Basic Video Analytics is disabled.
To enable motion settings
1.
Click
Enable
. By default,
Enable
is not checked.
2.
Click
Save Area
.
Note:
The camera can only support either motion detection or analytics at a single time, but not both
at the same time.
To configure motion zone area settings
3.
From the
Sensitivity
drop-down list, select
High, Medium,
or
Low
. The camera reacts to slight
changes in motion or brightness in the motion zone when set to
High
, while the camera reacts to
big changes in brightness or motion when set to
Low
.
To define the method to store a snapshot
