FLIR 72501-0101 Скачать руководство пользователя

Страница: 44 / 146

Navigating the menu system

12.1

General

The figure above shows the two ways to navigate the menu system in the camera:

• Using the index finger or a stylus pen specially designed for capacitive touch usage to

navigate the menu system (left).

• Using the joystick to navigate the menu system (right) and the back button.

You can also use a combination of the two.

In this manual, it is assumed that the joystick is used, but most tasks can also be carried
out using the index finger or a stylus pen.

12.2

Navigating using the joystick

You navigate the menu system by using the joystick and the back button:

• To display the menu system, push the joystick.
• To navigate in menus, submenus, and dialog boxes, and to change values in dialog

boxes, move the joystick up/down or left/right.

• To confirm changes and settings in menus and dialog boxes, push the joystick.

• To leave dialog boxes and to go back in the menu system, push the back button

#T559954; r. AT/65353/65353; en-US

Содержание 72501-0101



















































































































































Результаты поиска

Содержание 72501-0101

Отзывы:

Похожие инструкции для 72501-0101

Бренды по названию

Популярные бренды

FLIR 72501-0101, Руководство пользователя

Результаты поиска

Содержание 72501-0101

Отзывы:

Похожие инструкции для 72501-0101

Бренды по названию

Популярные бренды