FLIR 72501-0101, Руководство пользователя

Страница: 108 / 146

Inspection Route 23
4. Activate the Inspection Route function by selecting ( Settings ) > Save options &
storage > Inspection route > On .
5. The camera is now ready.
23.3.2 Capturing inspection data
Once the camera is prepared, the inspection can start.
Note You can turn off the camera in the middle of an inspection. The camera will al-
ways save all data. When the camera is turned on again, it will display the first uncom-
pleted inspection point.
1. The current point indicator displays which inspection point to inspect.
2. To view a description of the inspection point, e.g., instructions or reminders, tap the
document icon.
Note The document icon is only displayed if there is a description and/or comment
available for the inspection point.
3. When you are at the inspection point, take an image. The camera automatically
saves the image and sets the default status.
Note The default status is defined by the inspection route file. It is possible to
change the default status in the camera, see section 23.4 Configuration .
4. To edit the inspection point data, tap the current point indicator. This displays a drop-
down menu where you can do the following:
• Set the status of the inspection point, see section 23.3.3.1 Setting the status .
• Delete the image, see section 23.3.3.2 Deleting an image .
• Add a comment, see section 23.3.3.3 Adding a comment .
Note Make sure the current point indicator displays the inspection point you want to
edit. If not, use the back or next arrow.
5. Tap the next arrow to continue to the next inspection point.
Note The camera can be configured to automatically continue to the next inspec-
tion point after saving an image, see section 23.4 Configuration .
6. When you have completed the last inspection point in the route, a dialog box is
displayed.
• To lock the inspection, select Lock .
• If you want to make any additional changes to the inspection, select Cancel . You
make the changes from the inspection list, see section 23.3.7 Inspection list .
7. Continue the inspection until you have completed all inspection points in all routes.
You can at any point open the inspection list to see an overview of the routes and
their progress, see section 23.3.7
Inspection list .
#T559954; r. AT/65353/65353; en-US 94