FIK Models
Attach cables with cotter pins
• The dual arm keyboard tray has slots that
align with the FIK-19 and FIK-23
• Choose the slot that gives the cable the most
freedom to move without being tangled.
• Slip the cotter pin through the eyelet in the
end of the cable to secure it.
• NOTE: If the cable tension is too tight, the lid
will not close. If this occurs, it is likely that the
keyboard tray is too far forward to the user
side. The easiest remedy is to use a small 3/8”
S hook you can purchase at a hardware store
to lengthen the cable. Cable ties will also
work.
Attach gas spring
• The gas spring ships attached to the flipIT lid
assembly
• Pry off the locking hub on the free end with a
flat blade screwdriver
• Press the gas spring to the post on the frame
• Replace the locking hub by pressing it in place
• NOTE:
The chrome shaft end of the gas spring
attaches to the frame to
prolong its service life.
11
