Flightcell DZM Скачать руководство пользователя страница 51

Страница: 51 / 88

| Flightcell

DZM Operating Manual | Firmware v2.00

Page 51 of 88 |

Configuring your Iridium satellite phone

This section describes how to carry out initial configuration of your Iridium satellite phone handset.

Configuring satellite phone service center number

The service center must be set up on your Iridium satellite phone before you can send SMS messages.

NOTE!

The service center number is set up only once, after which it is permanently stored in the satellite

phone.

Refer to "Configuring GPS tracking" on page 52 for further information about important settings that need to

be configured before GPS data will be transmitted.

Setting the service center number on the satellite phone handset:

Press the 'Envelope' key on the keypad of the Iridium satellite phone.

Scroll to 'Message Settings' and press 'OK'.

Scroll to 'Service Center' and press 'OK'.

Enter 00881662900005 or +881662900005

Press 'OK'.

Overriding satellite phone antenna lock

Some early versions of the Iridium satellite phone will not work unless the antenna is locked in the 10 o'clock or 2

o'clock position. If you receive an antenna alert when the satellite phone handset is installed in the Iridium phone

mount, you will need to override this antenna lock.

Overriding the antenna lock:

Enter the code

*#92#

into the satellite phone. "ANTENNA ALERT OFF" displays.

Power the satellite phone off and re-start for the override code to take effect. Once the satellite phone has

been powered-on again it will not require the antenna to be rotated.

For the 9505 satellite phone, the override code operates in handsets operating firmware version LAC0307. For

the 9505A satellite phone, the override code operates in handsets operating firmware versions LAC0307,

ISO5004 or ISO6004. Enter the code

*#91#

to identify the firmware version of your Iridium satellite phone

handset.

Содержание DZM

























































































Результаты поиска

Содержание DZM

Отзывы:

Бренды по названию

Популярные бренды

Flightcell DZM, Руководство по эксплуатации

Результаты поиска

Содержание DZM

Отзывы:

Бренды по названию

Популярные бренды