| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 42 of 88 |
Altering the cell modem audio volume on the DZM:
From the 'Audio Menu', use the arrow keys to navigate to 'Cell
Volume'.
Press the
ENTER key to select. The 'Cell Volume' screen
displays.
Press the
or
arrow keys to increase cell modem
volume.
OR
press the
or
arrow keys to decrease cell modem
volume. 0 is the lowest volume. 100 is the highest volume. 50 is
the default volume
Press the
ENTER key to save. You are returned to the
'Audio Menu'.
Isolating (muting) phones
Mute the audio between the DZM and connected cell and satellite phones using the Isolate Phones function.
When isolated, there is no audio from the DZM to the phones and incoming audio volume from the phones is
reduced. This means the crew can hold a private discussion, while still being able to hear the party on the other
end of the phone call.
Keypad tones (if enabled) and incoming audio from auxiliary audio devices are still audible.
Refer to "Switching keypad tones on and off" on page 75 for further information about keypad tones. Refer to
"Setting auxiliary device audio volume" on page 43 for further information about auxiliary audio devices.
STEP 1 - Isolating (muting) phones:
When in the 'Main Screen', press the
ISO PH key.
Cell/Sat
Isolated
displays on the 'Main Screen' when phones are isolated.
