webdyn.com
V2.0 subject to changes | Webdyn © by Flexitron Group
46
{
“config”:
{
“radio”:
{
“mode”: [2,0],
“duration”: [120,180],
“manufFilter”: { “$type”: “00”,”$binary”:
“TDARpQ==”},
“mediumFilter”: { “$type”: “00”,”$binary”: “BwE=”},
}
},
“crc”: 0
}
Explanation :
Data recovery will start with T1+C1 mode for 120 seconds, then continue with S1 mode for 180 seconds.
4.2.2.1 Whitelist
It is possible to activate the management of acquisitions of sensors or counters according to the WM-
Bus identifiers entered in the white list. During a listening window, it may close before the programmed
duration if the data for all the equipment on the white list has been recorded.
The whitelist is a BSON file that is deposited as a configuration file for the hub. The whitelist accepts up
to 2000 WM-Bus identifiers.
The WebdynEasy hub whitelist file is in BSON format and its format is as follows: « <uid>-wlFilter.bson ».
If the “skipVersionField” and/or “skipMediumField” parameters of the WM-Bus radio part are
modified, it is essential to reinject the whitelist file “<uid>-wlFilter.bson” into the concentrator.
