I
I
I
5
I
4
I
3
I
7
I
2
I
6
I
RF WIRELESS
B/S
B/S
AUTO
CYAN
PURPLE
YELLOW
FLASH
FADE3
JUMP3
FLASH7
FADE7
JUMP7
BLUE
GREEN
RED
W
B
G
R
INTRODUCTION
The M8 remote control and receiver for RGBW LED strip lights uses the most advanced RF wireless transmission technology. The system consists
of 2 parts: the handheld remote control and the in-line receiver.
Featuring a fully programmable remote control which allows you to quickly choose red, green, blue or white, cycle through 6 preset colors, 6 preset
modes, create and save color schemes and alter the brightness of your strips. In addition, it includes a wall mount to easily place the remote control
on a nearby wall.
This unit is compatible with any of the Flexfire LEDs RGB+W LED strip light.
SAFETY AND WARNINGS
REMOTE CONTROL
Install in accordance with the National Electric Code, and local regulations.
This product should be installed and serviced by a qualified electrician.
Do not connect directly to high voltage 120V AC power.
This product is rated for indoor installation and is not protected against moisture.
Proper heat dissipation will prolong the working lifespan of this product. Install in a well ventilated area.
Only install compatible LED drivers and fixtures. Contact Technical Support or visit the product page for compatible accessories.
Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage
rating, and type (in-wall rated, wet location rated, etc). Inadequate wire installation could overheat wires and cause fire.
Utilize the wiring diagrams in this installation guide for basic setups.
•
•
•
•
•
•
•
•
Details
COLOR CH WHITE M8
LED Remote Control & Receiver
SKU:
Working Voltage:
Working Frequency:
Max. Signal Range:
Working Temp:
Dimensions:
Weight:
Warranty:
RGBW-CTRL-M8
3V (CR2032 battery)*
433.92MHz
130ft (40m)
-4°F ~ 131°F (-20°C ~ 55°C)
H: 4 1/4” (104mm) W: 2 5/16” (59mm)
D: 3/8” (9mm)**
1.48oz (42g)
5 years
On/Off Button
6 Mode Auto Play
Custom Color Save
Signal Indicator LED
*Replace with CR2032 battery (Standard watch battery
from local hardware store)
Color Shortcuts
Brightness/Speed
Custom Color Commands
(color/mode shortcuts)
Mode Shortcuts
(press and hold each color to dim)
Switch and Play
(switch or play saved colors 1-7)
**Comes with a wall mount for easy storage
V.2018.11.01
RGBW-CTRL-M8
1
page
support@FlexfireLEDs.com
925-273-9080 opt 2
RGB+W M8 Remote Control & Receiver
User Guide
